1. Technical parameters

2.1 Power supply: three-phase AC 380V; 50Hz

Main engine power: 30kw (motor), 0.7kw

Power of auxiliary engine: 18.5kw (motor), 0.7kw

White slurry feeding tank: 1.5kw

Total power: 70.6kw

Upper limit of oil pressure: 12mpa.

Design capacity: 2-3.5 tons (material viscosity is different)

Host 1250mm×1350mm×2100mm(length X width X height). Weight: 1200 kg.

Auxiliary machine 1250mm X 1250mm X 2000mm(length x width x height). Weight: 1000 kg.

Large energy storage tank φ660mm×1800mm, weight 1350kg

2.3 Mixing efficiency of the main engine: the diameter of the main engine mixing quantitative cylinder is 130, the auxiliary cylinder is 32 (can be customized according to customer needs), the cylinder stroke is 180mm, and the pressing times of the cylinder per minute are 9-14 times/minute or 21L-33L/min (according to the viscosity of the mixture). Auxiliary machine mixing efficiency: the host mixing quantitative cylinder diameter Φ130, A color slurry cylinder Φ35 (can be customized according to customer needs) B color slurry cylinder Φ20 (can be customized according to customer needs), cylinder stroke 180mm to perform cylinder per minute press times 7-12 times/minute or 14L-24L/min (according to the viscosity of the mixture). 2.4 Large energy storage tank is designed to store 0-200L of energy and withstand a maximum voltage of 1.0mpa. Base material energy storage tank, medium storage tank, finished rubber energy storage tank (energy storage after mixing and cooling of color paste) energy storage range 0-15L, designed to withstand the maximum voltage

1.3mpa.

Auxiliary storage feeding tank: volume 250L,

White slurry feeding tank: volume 300L

Equipment structure: The alcohol mixer produced by our factory is composed of base material and auxiliary mixing part (hereinafter referred to as the main engine) : feed ball valve, base material storage tank, auxiliary material charging storage tank, auxiliary liquid level detection tank, base material quantitative cylinder, auxiliary material quantitative cylinder, hydraulic cylinder, discharge mixer, control box, liquid station, feed valve, discharge valve and other components. Color paste mixing part (hereinafter referred to as the auxiliary machine, the auxiliary machine is two), feed ball valve, color paste storage tank, base material quantitative cylinder, large quantitative cylinder, hydraulic cylinder, discharge mixer, control box, hydraulic station, feed valve, discharge valve and other groups. One big storage tank

3. Equipment accessories brand, origin

3. Working principle of alcohol type machine mixer: This machine mainly realizes the base material storage tank purchased by the customer through the high viscosity pump output to the base material storage tank, through the ball valve control host for auxiliaries and base material mixing, semi-finished rubber into the pressure storage tank, through the pipeline output to the screw machine, (screw machine needs to be connected to the vacuum pipeline) after cooling by the cooler output to the large pressure tank, through the pipeline output to two auxiliary machines, After the color mixing output is cooled by the cooler, the output is stored in the pressure storage tank, and the output is sent to the packaging machine.

4: raw material ratio:

Belongs to the customized part, the demander needs to provide the proportion of base material and additives, (volume proportion) the proportion of base material and color paste (volume proportion), if can not provide volume ratio, provide the proportion of raw material weight and the proportion of raw material, so that the manufacturer can do the cylinder of raw material in advance, (small cylinder construction period is long).

5. Installation: After the equipment arrives at the demander, wait for the demander to install the base material storage tank, and inform the supplier to guide the installation after the screw machine is in place. This purchase does not include the installation part of the pipeline and the accessories required for pipeline installation. The demander shall inform the supplier after preparing the accessories, and shall arrive at the site within two days to guide the placement of the equipment, and inform the installation sequence of the equipment and the precautions in the installation process, such as the reserved discharge port of the pipeline, valve, distance, size of the cable, placement of the storage tank, water cooling pipe and other details in the installation. Upon completion of pipeline welding, the demander shall inform the supplier of the operation procedures and procedures for on-site training.